Here is a great Easter project using printable water slide decal paper to create your own custom decals for Easter eggs.
With printable decal paper any image you desire can be put on an egg. Imagine the possibilities! Super heroes! Botanical prints! Victorian Easter Bunnies and Chicks! Mermaids! Woodland creatures! Circus! Flowers! Zombies! (I'm not gonna judge!)
I chose to go with pin up girl bunny images for my eggs however, because I can't limit or control myself (I want it all!!) I also picked a few silhouette images. Somehow these two random themes ended up going really well together.
For this project you will need:
Water Slide Inkjet Decal Paper
Krylon Crystal Clear Acrylic Spray
Blown Out Eggs
You can purchase already blown out eggs or do them yourself.
Okay, let's get started!
Find the images you want to use and place them in a word document. Resize the images to the size you want.
Here are some great free graphic sites where you can find images to use:
The Graphics Fairy
The Vintage Moth
Step 2Print out the images as instructed for your water slide decal paper. For mine it said to set the paper setting to "glossy photo paper" and use the "best" resolution setting. I would recommend printing two sheets so you have an extra of each decal in case of mistakes.
Let the printed sheet dry for 30 min. then spray it with a coat of the acrylic spray. You will want to do 2-3 coats of the spray allowing each coat to dry for 30-60 minutes.
Cut each image out with scissors.
Place the decal in a small bowl of warm water. As soon as you can feel the film start to loosen from the paper remove it from the water.
Note- My decal paper instructions said to leave the decal in the water 45-60 seconds until it starts to separate from the paper. However, I found it worked much better if I removed the decal as soon as I could start to slide it away from the paper. This was about 10-15 seconds.
Slide the decal onto the egg by carefully pulling it off the paper backing.
With your fingers carefully work the air bubbles out until you have a smooth flat wrinkle free decal. This step took some practice and patience. (This is where having an extra decal of each image comes in handy.) It took me quite a few tries to get a method down of stretching and smoothing the decal with my fingers to get it smooth and wrinkle free.
Once all the air bubbles are gone rub over the decal with a dry q-tip or paper towel to dry it and firmly adhere it to the egg.
Display and enjoy your eggs!